メインコンテンツにスキップ

Reemplazo del conjunto de pantalla inferior de la Nintendo 3DS

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

英語
スペイン語

手順 1を翻訳中

手順1
Nintendo 3DS Lower Display Assembly Replacement: 手順 0、 3の画像 1 Nintendo 3DS Lower Display Assembly Replacement: 手順 0、 3の画像 2 Nintendo 3DS Lower Display Assembly Replacement: 手順 0、 3の画像 3
  • Set the motherboard assembly down so that the lower LCD is side-by-side with the motherboard.

  • Use the tip of a spudger or your fingers to peel back the white tape covering the touchscreen ribbon cable connector.

Coloca el conjunto de la placa base hacia abajo de modo que la pantalla LCD inferior quede al lado de la placa base.

Usa la punta de un spudger o tus dedos para retirar la cinta blanca que cubre el conector del cable plano de la pantalla táctil.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります