/
私のワークベンチ

お持ちのデバイス用の修理ガイドとパーツ一覧とアンサーフォーラムにアクセスする。

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
参加する
ログイン

Sostituzione scocca inferiore Nintendo 3DS

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての23個のガイドに反映されます。

ガイドに戻る
英語
イタリア語
次の手順

手順 1を翻訳中

手順1
Nintendo 3DS Lower Case Replacement: 手順 0、 1の画像 1

  • Use a JIS #00 screwdriver to remove the nine 6.3 mm black screws from the lower case.

  • JIS (Japanese Industrial Standards) screws are not the same as Phillips. To avoid stripping these screws, make sure you are using a JIS #00 screwdriver and not a PHILLIPS #00 screwdriver. You can use a PHILLIPS #00 with a lot of downwards force but be warned this will deform the screw head and you risk stripping it.

  • iFixit's Phillips head screwdriver is desinged to reduce damage on JIS head screws so it should be fine to use, still apply more force. Make sure it's iFixit's official Phillips screwdriver as we are unaware of any other manufacturer who does this.

  • Use a JIS #00 screwdriver to remove the 2.4 mm silver screw above the game cartridge slot.

Usa un cacciavite JIS #00 per rimuovere le nove viti nere da 6,3 mm dal case inferiore.

Le viti JIS (Japanese Industrial Standards) non sono uguali alle viti Phillips. Per evitare di spanare queste viti, assicurati di usare un cacciavite JIS #00 e non un cacciavite Phillips #00. Puoi usare un Phillips #00 applicando molta forza verso il basso, ma attenzione: ciò potrebbe deformare la testa della vite e rischi di spanarla.

Il cacciavite a testa Phillips di iFixit è progettato per ridurre i danni alle viti con testa JIS, quindi dovrebbe andare bene utilizzarlo, ma applica comunque più forza. Assicurati che sia il cacciavite ufficiale di iFixit, poiché non siamo a conoscenza di altri produttori che offrano questa caratteristica.

Usa un cacciavite JIS #00 per rimuovere la vite argentata da 2,4 mm sopra lo slot della cartuccia di gioco.

[* red] Use a JIS #00 screwdriver to remove the nine 6.3 mm black screws from the lower case.
[* icon_caution] JIS (Japanese Industrial Standards) screws are ***not*** the same as Phillips. To avoid stripping these screws, make sure you are using a JIS #00 screwdriver and not a PHILLIPS #00 screwdriver. You ''can'' use a PHILLIPS #00 with a lot of downwards force but be warned this ***will*** deform the screw head and you risk stripping it.
-[* icon_note] IFixIt's Phillips head screwdriver is desinged to reduce damage on JIS head screws so it should be fine to use, still apply more force. Make sure it's IFixIt's official Phillips screwdriver as we are unaware of any other manufacturer who does this.
+[* icon_note] iFixit's Phillips head screwdriver is desinged to reduce damage on JIS head screws so it should be fine to use, still apply more force. Make sure it's iFixit's official Phillips screwdriver as we are unaware of any other manufacturer who does this.
[* orange] Use a JIS #00 screwdriver to remove the 2.4 mm silver screw above the game cartridge slot.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。