メインコンテンツにスキップ

Soporte del cable del componente superior del Wi-Fi del iPad Air 2

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての11個のガイドに反映されます。

英語
スペイン語

手順 1を翻訳中

手順1
iPad Air 2 Wi-Fi Upper Component Cable Bracket: 手順 0、 3の画像 1 iPad Air 2 Wi-Fi Upper Component Cable Bracket: 手順 0、 3の画像 2 iPad Air 2 Wi-Fi Upper Component Cable Bracket: 手順 0、 3の画像 3
  • Remove the following four Phillips screws securing the upper component cable bracket to the tablet.

  • Two 1.6 mm

  • Two 1.3 mm

  • Slide the upper component cable bracket out from under the protective flaps and remove it from the iPad.

Quita los siguientes cuatro tornillos Phillips que sujetan el soporte del cable del componente superior a la tableta.

Desliza el soporte del cable del componente superior hacia afuera desde debajo de las aletas protectoras y quítalo del iPad.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります