メインコンテンツにスキップ

Sostituzione Case Inferiore Nintendo DS Lite

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての17個のガイドに反映されます。

英語
イタリア語

手順 4を翻訳中

手順4
Nintendo DS Lite Lower Case Replacement: 手順 0、 1の画像 1
  • Lift the lower case away from the rest of the DS Lite.

  • Pull carefully. Some units are sealed with adhesive, and pulling too hard can damage the power switch.

  • When re-assembling, make sure that power switch and volume sliders are properly aligned with the switches on the motherboard.

Solleva il case inferiore dal resto del DS Lite.

Tira con attenzione. Alcune unità sono sigillate con adesivo e tirare troppo forte può danneggiare l'interruttore dell'alimentazione.

Durante il riassemblaggio, assicurati che l'interruttore di alimentazione e il cursore del volume siano correttamente allineati con i rispettivi interruttori sulla scheda madre.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります