メインコンテンツにスキップ

Apertura y ensamblaje de la carcasa inferior

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての12個のガイドに反映されます。

英語
スペイン語

手順 14を翻訳中

手順14
Retina MacBook 2015 Opening Lower Case Assembly: 手順 0、 1の画像 1
  • Remove the two screws securing the USB-C port cable bracket:

  • 1.1 mm Tri-point Y00 screw

  • Some variations of this model may use a Phillips #00 screw.

  • 3.5 mm T5 Torx screw

Quita los dos tornillos asegurando el retenedor del cable del puerto USB-C:

Tornillo tripunta Y00 de 1.1 mm

Algunas variaciones de este modelo pueden usar un tornillo Phillips 00.

Tornillo Torx T5 de 3.5 mm

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります