メインコンテンツにスキップ

Apple Thunderbolt Display LCD tauschen

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。

英語
ドイツ語

手順 3を翻訳中

手順3
Apple Thunderbolt Display LCD Replacement: 手順 0、 2の画像 1 Apple Thunderbolt Display LCD Replacement: 手順 0、 2の画像 2
  • Slowly lift the LCD out from its placement and tilt it upwards.

  • It can be very helpful to have an extra set of hands to hold the LCD up while you work with the cables underneath.

  • There are four wires that connect the LCD to the rest of the components. Make sure not to pull hard and break any of the wires.

Hebe das Display langsam aus seinem Sitz heraus und kippe es hoch.

Es ist sehr hilfreich, wenn dich zwei weitere Hände unterstützen und das LCD festhalten, während du an den Kabeln darunter arbeitest.

Das LCD ist mit vier Kabeln an den restlichen Bauteilen angeschlossen. Achte darauf, dass du nicht zu fest an ihnen ziehst und sie beschädigst.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります