メインコンテンツにスキップ

Remplacement de la batterie de l'Apple Watch

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。

英語
フランス語

手順 3を翻訳中

手順3
Apple Watch Battery Replacement, Observe all warnings: 手順 0、 2の画像 1 Apple Watch Battery Replacement, Observe all warnings: 手順 0、 2の画像 2
Observe all warnings
  • Because the gap between the screen and watch body is so thin, a sharp blade is required to separate the two. Read the following warnings carefully before proceeding.

  • Protect your fingers by keeping them completely clear of the knife. If in doubt, protect your free hand with a heavy glove, such as a leather shop glove or gardening glove.

  • Be careful not to apply too much pressure, as this might cause the knife to slip and cut you, or damage the watch.

  • Wear eye protection. The knife or glass may break, sending pieces flying.

L'espace entre le boîtier de la montre et l'écran est tellement étroit que vous aurez besoin d'une lame très fine pour pouvoir les séparer. Lisez attentivement les instructions suivantes avant de commencer.

N'approchez jamais vos doigts de la lame. En cas de doute, enfilez un gant épais (p.e. un gant en cuir ou de jardinage) à votre main libre.

Faites attention de ne pas appliquer une trop forte pression. La lame risquerait de glisser et de vous couper ou d'endommager la montre.

Portez des lunettes de sécurité. Si la lame ou le verre se brisent, des morceaux risquent de vous atteindre.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります