メインコンテンツにスキップ

Reemplazo de la placa del escudo LCD de una iPad Mini 3 Wi-Fi

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての48個のガイドに反映されます。

英語
スペイン語

手順 8を翻訳中

手順8
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 手順 0、 3の画像 1 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 手順 0、 3の画像 2 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 手順 0、 3の画像 3
  • Take the first pick you inserted and slide it up toward the top corner of the iPad.

  • If you can see the tip of the opening pick through the front glass, don't panic—just pull the pick out a little bit. Most likely, everything will be fine, but try to avoid this as it may deposit adhesive on the front of the LCD that is difficult to clean off.

Toma la primer púa que insertaste y deslízala hacia la esquina superior de la iPad.

Si puedes ver la punta de la púa de apertura a través del cristal frontal, no te asustes-solo jala la púa hacia afuera un poco. Lo mas probable es que todo este bien, pero trata de evitar esto ya que puede colocar adhesivo en el frontal del LCD el cual es difícil de limpiar.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります