メインコンテンツにスキップ

iPod Touch 第3世代のロジックボードの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 9を翻訳中

手順9
iPod Touch 3rd Generation Logic Board Replacement: 手順 0、 2の画像 1 iPod Touch 3rd Generation Logic Board Replacement: 手順 0、 2の画像 2
  • Use the edge of an iPod opening tool to carefully free the antenna connector cable from the adhesive securing it to the rear case.

  • Use the edge of your iPod opening tool to disconnect the antenna cable.

iPod開口ツールの先端を使って、リアケースに留められた接着剤からアンテナコネクタケーブルを注意深く解放します。

iPod開口ツールの先端を使って、アンテナケーブルの接続を外します。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります