注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての11個のガイドに反映されます。
手順 5を翻訳中
手順5
-
The clips shown in red can be detached by inserting a metal spudger underneath the bottom edge of the clip. Once underneath the bottom edge, simply prying away from the console will free the clip.
| - | [* icon_note] In the following steps, you will remove the bottom bezel, which is attached to the rest of the console by the |
|---|---|
| + | [* icon_note] In the following steps, you will remove the bottom bezel, which is attached to the rest of the console by the four clips shown. |
| [* black] The clips shown in red can be detached by inserting a metal spudger underneath the bottom edge of the clip. Once underneath the bottom edge, simply prying away from the console will free the clip. |
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。