メインコンテンツにスキップ

Sostituzione pannello inferiore Xbox 360 S

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての11個のガイドに反映されます。

英語
イタリア語

手順 9を翻訳中

手順9
Xbox 360 S Bottom Panel Replacement: 手順 0、 1の画像 1
  • This clip does not have a slit in the bezel to guide you. You can locate the clip by looking under the bezel near the hard drive slot.

  • Insert a spudger between the silver rim and bottom bezel directly above the clip shown.

  • Release the clip while pulling up on the bottom bezel.

Questo fermo non ha una fessura nella parte inferiore del pannello per guidarti. Puoi individuare il fermo guardando sotto il pannello vicino allo slot dell'hard drive.

Inserisci uno spudger tra il bordo argento e il pannello inferiore direttamente sopra il fermo mostrato.

Rilascia il fermo mentre sollevi il pannello inferiore.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります