Skip to main content

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
日本語

手順 1を翻訳中

Step 1
Insert the flat end of a spudger between the thin rubber strip surrounding the front display bezel and the rear display bezel. Do not try to insert the spudger between the thin rubber strip and the plastic face of the front display bezel. Use the flat end of your spudger to carefully pry the front display bezel away from the adhesive securing it to the rear display bezel.
  • Insert the flat end of a spudger between the thin rubber strip surrounding the front display bezel and the rear display bezel.

  • Do not try to insert the spudger between the thin rubber strip and the plastic face of the front display bezel.

  • Use the flat end of your spudger to carefully pry the front display bezel away from the adhesive securing it to the rear display bezel.

  • Do not pry against the fragile glass LCD panel. Also, do not excessively bend the plastic, as it may permanently deform.

  • Continue prying until the front display bezel is free along the right side of the display and behind the right clutch hinge.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります