メインコンテンツにスキップ

iMac Intel 21.5" EMC 2638 Display austauschen

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての13個のガイドに反映されます。

英語
ドイツ語

手順 5を翻訳中

手順5
iMac Intel 21.5" EMC 2638 Display Replacement: 手順 0、 3の画像 1 iMac Intel 21.5" EMC 2638 Display Replacement: 手順 0、 3の画像 2 iMac Intel 21.5" EMC 2638 Display Replacement: 手順 0、 3の画像 3
  • Lift the display up from the frame and remove it from the iMac.

  • It may be necessary to slowly lift from one side, to peel against the remaining adhesive.

  • Be very careful handling the display—it's big, heavy, and made of glass.

  • During reassembly, head over to our display adhesive guide to install the new adhesive.

Hebe das Display nach oben aus dem Rahmen und entferne es aus dem iMac heraus.

Möglicherweise musst du an einer Seite anfangen, das Display langsam anzuheben, um den Rest des Klebebandes zu lösen.

Sei vorsichtig bei der Handhabung des Displays. Es ist groß, schwer und aus Glas.

Benutze beim Zusammenbau unsere Anleitung für die Displayklebestreifen, um das Display wieder zu befestigen.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります