注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。
手順 2を翻訳中
手順2
-
Insert a plastic card under the lower battery cell, at the lower right-hand corner.
| [* icon_caution] Throughout the following procedure, you'll be sliding thin plastic cards between the battery and rear case of the iPad, to separate the adhesive securing the battery. Be careful to keep the cards as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals. | |
| - | [* black] Insert a plastic card under the lower battery cell, at the lower right-hand corner. |
| + | [* black] Insert a [product|IF145-101|plastic card] under the lower battery cell, at the lower right-hand corner. |
| [* icon_note] If you encounter significant resistance, re-heat the iOpener and repeat the previous step to give the adhesive more time to soften. |
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。