メインコンテンツにスキップ

iPad Air Wi-Fi Touch Screen austauschen

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての76個のガイドに反映されます。

英語
ドイツ語

手順 1を翻訳中

手順1
iPad Air Wi-Fi Front Panel Replacement: 手順 0、 3の画像 1 iPad Air Wi-Fi Front Panel Replacement: 手順 0、 3の画像 2 iPad Air Wi-Fi Front Panel Replacement: 手順 0、 3の画像 3
  • If your display glass is cracked, keep further breakage contained and prevent bodily harm during your repair by taping the glass.

  • Lay overlapping strips of clear packing tape over the iPad's display until the whole face is covered.

  • This will keep glass shards contained and provide structural integrity when prying and lifting the display.

  • Do your best to follow the rest of the guide as described. However, once the glass is broken, it will likely continue to crack as you work, and you may need to use a metal prying tool to scoop the glass out.

  • Wear safety glasses to protect your eyes, and be careful not to damage the LCD screen.

Wenn dein Touchscreen gebrochen ist, vermeide weitere Brüche und verletze dich nicht beim Berühren des Glases.

Klebe Paketband über den Touchscreen des iPads, sodass die ganze Oberseite bedeckt ist.

Das Klebeband deckt Splitter ab und hält den Touchscreen während des Entfernens zusammen.

Bitte befolge die restliche Anleitung wie beschrieben. Wenn das Glas einmal gebrochen ist, wird es während der Reparatur weiter brechen. Eventuell benötigst du einen Metallspatel, um das Glas zu entfernen.

Trage eine Sicherheitsbrille, um deine Augen zu schützen. Sei vorsichtig und beschädige nicht das LCD.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります