/
私のワークベンチ

お持ちのデバイス用の修理ガイドとパーツ一覧とアンサーフォーラムにアクセスする。

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
参加する
ログイン

Sustitución del ventilador de una Xbox Series X

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての21個のガイドに反映されます。

ガイドに戻る
英語
スペイン語
前の手順

手順 3を翻訳中

手順3
Fan Removal, Remove the fan: 手順 0、 3の画像 1 Fan Removal, Remove the fan: 手順 0、 3の画像 2 Fan Removal, Remove the fan: 手順 0、 3の画像 3
Remove the fan

  • Slide the fan out of its slot to remove it.

  • During reassembly:

  • Before installing the fan, make sure it's clean! Use a dust blower or compressed air to blow off any dust or debris, and wipe the fan clean with a clean cloth.

  • Use a finger to keep the fan blades steady—it makes them easier to clean.

  • Note that the fan can only be installed one way—make sure Master Chief is facing you.

Extraer el ventilador

Desliza el ventilador fuera de su ranura.

Durante la reinstalación, ten en cuenta que el ventilador solo puede instalarse de una forma -asegúrate que Master Chief esté de frente a ti.

Si estás reemplazando el ventilador, es posible que un ventilador nuevo no incluya el soporte de instalación de plástico, que se fija al ventilador con cuatro tornillos Torx T10. Esto no se muestra en esta guía.

[title] Remove the fan
[* black] Slide the fan out of its slot to remove it.
-[* icon_reminder] During reinstallation, note that the fan can only be installed one way—make sure [link|https://d3nevzfk7ii3be.cloudfront.net/igi/hZQNu3JSXQ4MaVXE.full|Master Chief|new_window=true] is facing you.
- [* icon_note] If you're replacing the fan, a new fan might not include the plastic installation bracket, which is attached to the fan with four T10 Torx screws. This isn't pictured in this guide.
+[* icon_reminder] During reassembly:
+ [* black] Before installing the fan, make sure it's clean! Use a [product|IF145-064-2|dust blower|new_window=true] or compressed air to blow off any dust or debris, and wipe the fan clean with a clean cloth.
+ [* icon_note] Use a finger to keep the fan blades steady—it makes them easier to clean.
+ [* black] Note that the fan can only be installed one way—make sure [link|https://d3nevzfk7ii3be.cloudfront.net/igi/hZQNu3JSXQ4MaVXE.full|Master Chief|new_window=true] is facing you.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。