/
私のワークベンチ

お持ちのデバイス用の修理ガイドとパーツ一覧とアンサーフォーラムにアクセスする。

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
参加する
ログイン

Xbox Series X Vervanging van de ventilator

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての21個のガイドに反映されます。

ガイドに戻る
英語
オランダ語
前の手順 次の手順

手順 2を翻訳中

手順2
Fan Removal, Disconnect the fan cable: 手順 0、 3の画像 1 Fan Removal, Disconnect the fan cable: 手順 0、 3の画像 2 Fan Removal, Disconnect the fan cable: 手順 0、 3の画像 3
Disconnect the fan cable

  • Use your fingernails or a pair of angled tweezers to firmly grip the edges of the fan cable connector.

  • Grip your tweezers close the connector to get a better grip.

  • Pull the connector straight out of the socket to disconnect it.

  • If you're having trouble, gently rock the connector side to side to loosen it.

  • Always pull cables by their connectors and not the wires themselves.

  • During reassembly, route the fan cable underneath its small cable guide on the fan housing so it doesn't interfere with the back panel.

Koppel de ventilatorkabel los

Gebruik een pincet met botte einden om de zijkanten van de kabelaansluiting van de ventilator vast te pakken. Trek deze vervolgens omhoog om deze los te maken van het middelste chassis.

Probeer kabels altijd via de aansluitingen weg te trekken en niet aan de kabels zelf.

Zorg dat je de ventilatorkabel, tijdens het weer in elkaar zetten van de spelcomputer, in de kabelgoot in de ventilatorbehuizing drukt zodat deze niet in de weg van het achterste paneel zit.

[title] Disconnect the fan cable
-[* black] Use your fingers or a pair of [product|IF145-020-4|blunt tweezers] to grip the edges of the fan cable connector, and pull up to disconnect it from the center chassis.
+[* black] Use your fingernails or a pair of angled tweezers to ''firmly'' grip the edges of the fan cable connector.
+ [* icon_note] Grip your tweezers close the connector to get a better grip.
+[* black] Pull the connector straight out of the socket to disconnect it.
+ [* icon_note] If you're having trouble, gently rock the connector side to side to loosen it.
[* icon_caution] Always pull cables by their connectors and not the wires themselves.
[* icon_reminder] During reassembly, route the fan cable underneath its small cable guide on the fan housing so it doesn't interfere with the back panel.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。