メインコンテンツにスキップ

Mac Pro初代モデルのハードドライブとハードドライブキャリア

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 1を翻訳中

手順1
Mac Pro First Generation Hard drives and hard drive carriers (Early 2008): 手順 0、 1の画像 1
  • The hard drives must meet the following specifications:

  • Type: Serial Attached SCSI (SAS) or Serial ATA (SATA) 3 Gb/s

  • Width: 3.9 inches (102 mm)

  • Depth: 5.7 inches (147 mm)

  • Height: 1.0 inch

ハードドライブは、次の仕様に適用しなければなりません。

タイプ:Serial Attached SCSI (SAS) or Serial ATA (SATA) 3 Gb/s

幅:102mm (3.9インチ)

奥行:147mm (5.7インチ)

高さ:25mm(1.0インチ)

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります