メインコンテンツにスキップ

ロジクール Logitech MX Keys フットの交換

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
日本語

手順 3を翻訳中

手順3
Logitech MX Keys Feet Replacement: 手順 0、 3の画像 1 Logitech MX Keys Feet Replacement: 手順 0、 3の画像 2 Logitech MX Keys Feet Replacement: 手順 0、 3の画像 3
  • The foot should come up without much force. If it feels stuck, apply more heat and try again.

  • Insert the point of a spudger under an end of the foot.

  • Push the spudger underneath the foot and lift until you can grip it with your fingers.

  • Peel the foot up and remove it.

  • Repeat the previous two steps to remove the remaining feet.

  • If you're just replacing the battery, you only need to remove the feet along the top edge.

それほど力を入れなくても足が上がるはずだ。引っかかるようであれば、さらに熱を加え、もう一度試す。

スパッダーの先を足の端の下に差し込む。

スパッジャーをフットの下に押し込み、指でつかめるようになるまで持ち上げる。

フットを剥がします。

前の2つの手順を繰り返して、残りのフットを取り外します。

バッテリーを交換するだけなら、上端に沿って付いているフットを取り外すだけで十分です。全てを剥がす必要はありません。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります