メインコンテンツにスキップ

iPod Nano 第7世代のディスプレイアセンブリの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 1を翻訳中

手順1
iPod Nano 7th Generation Display Assembly Replacement: 手順 0、 2の画像 1 iPod Nano 7th Generation Display Assembly Replacement: 手順 0、 2の画像 2
  • Insert a spudger under the metal midframe and display on the left side of the home button.

  • Make sure that the spudger is under the entire display assembly to prevent bending the metal midframe.

  • Rotate the spudger around the home button and across the front panel, releasing the adhesive holding the display in place.

ホームボタン左側のメタル製ミッドフレームとディスプレイの下に、スパッジャーを差し込みます。

スパッジャーがディスプレイアセンブリ全体の下に差し込まれているか確認してください。メタル製のミッドフレームが湾曲しないよう防ぐことができます。

ホームボタン周辺からフロントパネルにかけてスパッジャーを回転させ、ディスプレイを固定している接着剤をはがします。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります