メインコンテンツにスキップ

iPod Nano 第7世代のフロントパネルアセンブリの交換

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての8個のガイドに反映されます。

英語
日本語

手順 10を翻訳中

手順10
iPod Nano 7th Generation Front Panel Assembly Replacement: 手順 0、 2の画像 1 iPod Nano 7th Generation Front Panel Assembly Replacement: 手順 0、 2の画像 2
  • Pull the front panel assembly slightly down and partially out of the device.

  • You only need to open the device enough to gain access to the display cable connectors near the sleep/power button.

  • Do not separate the two halves entirely, they are still connected by several cables.

フロントパネルアセンブリを少し下に引き、部分的にデバイスの外に出してください。

スリープ/電源ボタン付近のディスプレイケーブルコネクターにアクセスできる程度に本体を開ければ十分です。

両側半分はまだいくつかのケーブルで接続されているので、完全に分離しないでください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります