メインコンテンツにスキップ

Pixel 8 Pro 5G mmWave Kabel abtrennen

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての11個のガイドに反映されます。

英語
ドイツ語

手順 4を翻訳中

手順4
Pixel 8 Pro 5G mmWave Cable Detachment, Peel up the 5G mmWave antenna: 手順 0、 3の画像 1 Pixel 8 Pro 5G mmWave Cable Detachment, Peel up the 5G mmWave antenna: 手順 0、 3の画像 2 Pixel 8 Pro 5G mmWave Cable Detachment, Peel up the 5G mmWave antenna: 手順 0、 3の画像 3
Peel up the 5G mmWave antenna
  • Grip the bottom of the 5G mmWave antenna cable and gently peel it from the midframe.

  • During reassembly, press the cable back into place on the midframe to secure it with the old adhesive. If it doesn't stick, use thin, double-sided tape to secure it.

Fasse das Kabel zur 5G mmWave Antenne am unteren Teil an und löse es behutsam vom Mittelrahmen ab.

Drücke das Kabel beim Zusammenbau wieder an seinen Platz am Mittelrahmen herunter, um es mit dem alten Kleber zu befestigen. Wenn es nicht kleben bleibt, verwende dünnes, doppelseitiges Klebeband.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります