/
私のワークベンチ

お持ちのデバイス用の修理ガイドとパーツ一覧とアンサーフォーラムにアクセスする。

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
参加する
ログイン

索尼 WF-1000XM4 无线耳机电池更换

ガイドに戻る
英語
中国語
前の手順 次の手順

手順 8を翻訳中

手順8
Sony WF-1000XM4 Wireless Earbuds battery replacement, Unstick circuit board from the battery: 手順 0、 3の画像 1 Sony WF-1000XM4 Wireless Earbuds battery replacement, Unstick circuit board from the battery: 手順 0、 3の画像 2 Sony WF-1000XM4 Wireless Earbuds battery replacement, Unstick circuit board from the battery: 手順 0、 3の画像 3
Unstick circuit board from the battery

  • Find the junction between the electronic circuit and the earbud battery just below it.

  • Using an Opening Pick or a very thin plastic tool, very gently unstick the circuit board from the battery by inserting the Opening Pick between the circuit board and the battery.

  • The circuit board sticks directly to the negative battery terminal with adhesive.

  • Caution: There is a tiny metal contact under the circuit board that makes contact with the battery. Unstick the circuit board gently to avoid damaging this contact.

  • Do not use metal tools in this step as you may short-circuit the battery.

  • Once the circuit board is unstuck from the battery, lift it up as shown on the third picture to have enough space to remove the battery.

从电池上取下电路板

找到电子电路和耳机电池之间的连接点，就在下方。

使用翘片或很薄的塑料工具，将翘片插入电路板和电池之间，轻轻地将电路板从电池上取下。

电路板用粘合剂直接粘在电池负极上。

注意：电路板下有一个微小的金属触点与电池接触。请轻轻揭开电路板，以免损坏该触点。

在此步骤中，请勿使用金属工具，以免造成电池短路。

将电路板从电池上取下后，如第三张图片所示将其向上抬起，以便有足够的空间取下电池。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。