手順 5を翻訳中
手順5
Unplug board-to-board connector
-
Once the earbud is open, you will see two tiny circuit boards linked by a board-to-board connector.
-
Using an Opening Pick, unplug the two circuit boards by levering very gently between them.
-
Set the upper part of the earbud shell aside in order to reassemble it later.
-
The upper part is highlighted in red in the third picture.
-
The lower part is highlighted in dark blue in the third picture.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。