メインコンテンツにスキップ

大型機械におけるコンデンサの放電方法

英語
日本語

手順 3を翻訳中

手順3
How to Discharge a Capacitor in Large Machinery, Check with a multimeter: 手順 0、 1の画像 1
Check with a multimeter
  • If you have a multimeter, you can check to see if the capacitor is fully drained.

  • Set the meter to its DC voltage measuring mode and measure across the terminals.

  • Any value under 10 volts means your capacitor is sufficiently drained.

マルチメーターがあれば、コンデンサーが完全に放電しているかどうかを確認できます。

メーターを直流電圧測定モードに設定し、端子間を測定します。

10ボルト以下の値は、コンデンサが十分に消耗していることを意味します。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります