注意:あなたはさきほど閲覧していたガイドの前提条件を編集しています。あなたが行った変更は、この手順を含む個のガイド全体に影響を与えます。
手順 8を翻訳中
手順8
-
Insert your opening tool into the seam between the two housings on the controller’s right edge.
-
Slide the opening tool along the right edge and pry up intermittently to release the plastic clips.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。