メインコンテンツにスキップ

開腹方法

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての10個のガイドに反映されます。

英語
日本語

手順 8を翻訳中

手順8
Opening Procedure, Separate the left edge adhesive: 手順 0、 3の画像 1 Opening Procedure, Separate the left edge adhesive: 手順 0、 3の画像 2 Opening Procedure, Separate the left edge adhesive: 手順 0、 3の画像 3
Separate the left edge adhesive
  • Don't insert the pick more than 3 mm or you'll damage the display edges.

  • Insert a new opening pick in the gap you just created.

  • Slide the opening pick along the left edge to separate the adhesive.

  • Leave the pick in the bottom left corner to prevent the adhesive from re-sealing.

ピックを3mm以上差し込まないでください。ディスプレイのエッジを破損することがあります。

作った隙間に新しいオープニングピックを差し込みます。

オープニングピックを左端に沿ってスライドしながら、接着剤を乖離します。

接着剤の再装着を防ぐため、ピックをその場に残します。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります