メインコンテンツにスキップ

iPad Pro 12.9 英寸第五代打开程序

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての6個のガイドに反映されます。

手順 20を翻訳中

英語
中国語
手順20
iPad Pro 12.9" 5th Gen Opening Procedure, Reposition the screen: 手順 0、 3の画像 1 iPad Pro 12.9" 5th Gen Opening Procedure, Reposition the screen: 手順 0、 3の画像 2 iPad Pro 12.9" 5th Gen Opening Procedure, Reposition the screen: 手順 0、 3の画像 3
Reposition the screen
  • Don't fully remove the screen, as it's attached by several cables.

  • Grab two opposing corners of the screen and lift up to separate it from the frame.

  • If the screen feels stuck, slide your opening picks around the perimeter to separate any remaining adhesive. Pay attention to sensitive areas shown in previous steps.

  • Shift the screen towards the bottom right corner of the frame until the ribbon cable near the top edge is uncovered.

不要完全卸下屏幕,因为它通过几根排线连接到框架上。

抓住屏幕的两个相对角并将其抬起以将其与框架分离。

如果感觉屏幕被卡住,请沿着周边滑动撬片,以分离任何剩余的粘合剂。 注意前面步骤中显示的敏感区域。

将屏幕移向框架的右下角,直到顶部边缘附近的带状排线露出。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります