メインコンテンツにスキップ

iFixit uses cookies to enhance site functionality, analyze traffic, and personalize ads. By using our site, you agree to our cookie use and Privacy Policy.

iPad Pro 12.9" 5th Gen 여는 절차

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての6個のガイドに反映されます。

英語
韓国語

手順 20を翻訳中

手順20
iPad Pro 12.9" 5th Gen Opening Procedure, Reposition the screen: 手順 0、 3の画像 1 iPad Pro 12.9" 5th Gen Opening Procedure, Reposition the screen: 手順 0、 3の画像 2 iPad Pro 12.9" 5th Gen Opening Procedure, Reposition the screen: 手順 0、 3の画像 3
Reposition the screen
  • Don't fully remove the screen, as it's attached by several cables.

  • Grab two opposing corners of the screen and lift up to separate it from the frame.

  • If the screen feels stuck, slide your opening picks around the perimeter to separate any remaining adhesive. Pay attention to sensitive areas shown in previous steps.

  • Shift the screen towards the bottom right corner of the frame until the ribbon cable near the top edge is uncovered.

스크린은 여러 개의 케이블로 프레임에 연결되어 있으므로 완전히 분리하지 마세요.

스크린의 반대쪽 모서리 두 개를 잡고 들어올려 프레임에서 분리하세요.

스크린이 끼인 것 같으면 여는 픽을 주변으로 밀어서 남은 접착제를 분리하세요. 이전 단계에서 표시된 취약한 부분에 주의하세요.

상단 가장자리 근처의 리본 케이블이 드러날 때까지 스크린을 프레임의 오른쪽 하단 모서리를 향해 옮기세요.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります