メインコンテンツにスキップ

Microsoft Surface Pro 6 開口方法

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 16を翻訳中

手順16
Microsoft Surface Pro 6 Opening Procedure, Disconnect the screen: 手順 0、 2の画像 1 Microsoft Surface Pro 6 Opening Procedure, Disconnect the screen: 手順 0、 2の画像 2
Disconnect the screen
  • Use an opening pick to pry up one edge of the EMI shield covering the display board.

  • Repeat this procedure at different points around the shield until it is free.

  • Try not to deform the shield too much—you will need to reinstall it during reassembly.

オープニングピックを使用して、ディスプレイボードを覆っているEMIシールドの一方の端をこじ開けます。

シールドが外れるまで、シールドの周りのさまざまなポイントでこの手順を繰り返します。

シールドを変形しすぎないようにしてください。再組み立て時にシールドを再び取り付ける必要があります。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります