/
私のワークベンチ

お持ちのデバイス用の修理ガイドとパーツ一覧とアンサーフォーラムにアクセスする。

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
参加する
ログイン

iFixit uses cookies to enhance site functionality, analyze traffic, and personalize ads. By using our site, you agree to our cookie use and Privacy Policy.

Reemplazo de la placa base de Microsoft Surface Pro 6

ガイドに戻る
英語
スペイン語
次の手順

手順 1を翻訳中

手順1
Microsoft Surface Pro 6 Motherboard Replacement, Disconnect the display interconnect cable: 手順 0、 3の画像 1 Microsoft Surface Pro 6 Motherboard Replacement, Disconnect the display interconnect cable: 手順 0、 3の画像 2 Microsoft Surface Pro 6 Motherboard Replacement, Disconnect the display interconnect cable: 手順 0、 3の画像 3
Disconnect the display interconnect cable

  • Insert one point of a pair of pointed tweezers into a gap in the corner of the EMI shield covering the display interconnect connector.

  • Use the tweezers to pry the EMI shield away from the motherboard as much as you can without bending it.

  • Repeat this procedure at different points around the shield until it is free. Remove the shield.

  • Try not to deform the shield too much—you will need to reinstall it during reassembly.

Desconecta el cable de interconexión de la pantalla

Inserta una punta de un par de pinzas puntiagudas en un espacio en la esquina del protector EMI que cubre el conector de interconexión de la pantalla.

Usa las pinzas para separar la tapa EMI de la placa base tanto como puedas sin doblarlo.

Repite este procedimiento en diferentes puntos alrededor de la tapa hasta que quede libre. Retira la tapa.

Trata de no deformar demasiado la placa; deberás volver a instalarla durante el montaje.

[title] Disconnect the display interconnect cable
-[* black] Insert one point of a pair of pointed tweezers into a gap in the corner of the EMI shield covering the display interconnect connector.
+[* black] Insert one point of a pair of [product|IF145-020-2|pointed tweezers] into a gap in the corner of the EMI shield covering the display interconnect connector.
[* black] Use the tweezers to pry the EMI shield away from the motherboard as much as you can without bending it.
[* black] Repeat this procedure at different points around the shield until it is free. Remove the shield.
[* icon_caution] Try not to deform the shield too much—you will need to reinstall it during reassembly.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。