メインコンテンツにスキップ

Microsoft Surface Pro 6 Motherboard Assembly Replacement

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 11を翻訳中

手順11
Microsoft Surface Pro 6 Motherboard Assembly Replacement, Remove the microSD card reader connector shield: 手順 0、 3の画像 1 Microsoft Surface Pro 6 Motherboard Assembly Replacement, Remove the microSD card reader connector shield: 手順 0、 3の画像 2 Microsoft Surface Pro 6 Motherboard Assembly Replacement, Remove the microSD card reader connector shield: 手順 0、 3の画像 3
Remove the microSD card reader connector shield
  • Insert one point of a pair of pointed tweezers into a gap in the corner of the EMI shield covering the microSD card reader connector.

  • Use the tweezers to pry the EMI shield away from the motherboard as much as you can without bending it.

  • Repeat this procedure at different points around the shield until it is free. Remove the shield.

  • Try not to deform the shield too much—you will need to reinstall it during reassembly.

  • Take care not to puncture the battery with the tweezers while working on this shield.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります