ご注意：あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。
手順 4を翻訳中
手順4
Separating the Front & Back
-
Remove the six T-8 Security screws holding the front and the back of the controller together. Note: one (highlighted green) is covered by a white paste/sticker that crumbles when removed; this lets you know if someone has previously disassembled your device.
-
Once the screws are removed, you can insert a spudger under a vibration motor to provide a little leverage to separate the front from the back of the device.
-
The third image shows the front assembly removed from the back cover.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。