メインコンテンツにスキップ

Xbox One Elite Wireless Controller Series 2 Disassembly

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
中国語

手順 2を翻訳中

手順2
Xbox One Elite Wireless Controller Series 2 Disassembly, Removing the Faceplate: 手順 0、 2の画像 1 Xbox One Elite Wireless Controller Series 2 Disassembly, Removing the Faceplate: 手順 0、 2の画像 2
Removing the Faceplate
  • This is the only part in the face removal I would suggest using the metal spudger as you'll need a little more leverage to release the adhesive holding the faceplate down.

  • Insert the metal spudger in the area located but only as far as you need to get some leverage to pry the faceplate up. Work cautiously and slowly as this can easily damage components.

  • The adhesive is located in two places and because this doesn't seal the device together for IP-67/68 requirements, it isn't necessary to replace.

这是唯一一步推荐使用金属撬棒,因为需要撬起更大的空隙来分离粘连面板的胶。

在能施力的情况下尽量少插入金属撬棒,这一步损坏元件的风险较高所以请小心谨慎。

胶只在两个位置有,因为不需要IP-67/68登记的防尘防水,可以不更换胶。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります