手順 2を翻訳中
手順2
Remove All Existing Solder from the Previous Switch Insert
-
Insert your soldering iron tip inside the hole and use the pump from the other side to remove all of the solder.
-
Unfortunately, I didn't take pictures of this process, however, this is where the desoldering pump becomes a necessity. The new switches will need ample room to be inserted in the holes, so you'll have to make sure there is no remaining solder in them.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。