メインコンテンツにスキップ

iFixit uses cookies to enhance site functionality, analyze traffic, and personalize ads. By using our site, you agree to our cookie use and Privacy Policy.

Microsoft Surface Pro 6 Opening Procedure

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての13個のガイドに反映されます。

英語
韓国語

手順 3を翻訳中

手順3
Microsoft Surface Pro 6 Opening Procedure, Insert an opening pick into the speaker opening: 手順 0、 2の画像 1 Microsoft Surface Pro 6 Opening Procedure, Insert an opening pick into the speaker opening: 手順 0、 2の画像 2
Insert an opening pick into the speaker opening
  • Insert an opening pick into the speaker opening on the screen and slide the pick under the glass. Do not press the pick into the speaker grille, as the grille is easily torn.

  • Don't insert the opening pick any deeper than the black bezel on the side of the screen. Inserting the pick too far may damage the LCD.

여는 픽을 스크린의 스피커 틈에 끼우고 유리 밑에서 픽을 미세요. 그릴은 쉽게 찢어질 수 있으므로 스피커 그릴을 픽으로 누르지 마세요.

여는 픽을 스크린 측면의 검정색 베젤보다 깊게 끼우지 마세요. 픽을 너무 깊이 끼우면 LCD를 손상할 수 있습니다.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります