私のワークベンチ

お持ちのデバイス用の修理ガイドとパーツ一覧とアンサーフォーラムにアクセスする。

Xbox Series X 风扇更换

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての31個のガイドに反映されます。

ガイドに戻る

英語

中国語

手順 3を翻訳中

手順3

Xbox Series X Fan Replacement, Remove the fan: 手順 0、 2の画像 1

Xbox Series X Fan Replacement, Remove the fan: 手順 0、 2の画像 2

Remove the fan

Slide the fan out of its slot to remove it.
During reinstallation, note that the fan can only be installed one way—make sure Master Chief is facing you.
If you're replacing the fan, a new fan might not include the plastic installation bracket, which is attached to the fan with four T10 Torx screws. This isn't pictured in this guide.

	[title] Remove the fan
	[* black] Slide the fan out of its slot to remove it.
-	[* icon_reminder] During reinstallation, note that the fan can only be installed one way—make sure [link\|https://d3nevzfk7ii3be.cloudfront.net/igi/hZQNu3JSXQ4MaVXE.full\|Master Chief\|new_window=true] is facing you.
-	[* icon_note] If you ~~are~~ replacing the fan, a new fan ~~will probably~~ not include the plastic installation bracket~~. The bracket~~ is attached to the fan with 4 T10 Torx screws. This ~~is not~~ pictured in this guide.
+	[* icon_reminder] During reinstallation, note that the fan can only be installed one way—make sure [link\|https://d3nevzfk7ii3be.cloudfront.net/igi/hZQNu3JSXQ4MaVXE.full\|Master Chief\|new_window=true] is facing you.
+	[* icon_note] If you're replacing the fan, a new fan might not include the plastic installation bracket, which is attached to the fan with four T10 Torx screws. This isn't pictured in this guide.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。