メインコンテンツにスキップ

Xiaomi Mi 11の分解

英語
日本語

手順 11を翻訳中

手順11
Xiaomi Mi 11 Teardown: 手順 0、 3の画像 1 Xiaomi Mi 11 Teardown: 手順 0、 3の画像 2 Xiaomi Mi 11 Teardown: 手順 0、 3の画像 3
  • The AMOLED DotDisplay—one of the Mi 11's power eaters—shines with up to 120 Hz adaptive refresh rate and a WQHD+ resolution of 3200 x 1440 pixels (~515 ppi). It also packs a blistering 480 Hz touch sampling rate.

  • Curved displays can create a novel "infinity edge" look, but they are usually a pain to remove. But with some encouragement from our iMac Opening Wheel, the display comes off splinter-free—should we thank the lack of an IP rating for that?

  • The ultra-thin optical in-display fingerprint sensor by Goodix hides under the display and requires some gentle pulling to come free.

  • Lastly, we'll peel apart the Mi 11's vapor chamber cooling system, which combines with these multiple layers of graphite and AI to keep this machine cool. Copper and graphite are both very efficient at offloading heat, so we're not sure how much the AI actually contributes here—but sure, why not!

Mi11の電気供給を大量消費する原因の1つであるAMOLED Dot Displayは、最大120Hzのアダプティブリフレッシュレートと3200x 1440ピクセル(〜515 ppi)のWQHD+解像度を誇ります。 また、480Hzの非常に高速なタッチサンプリングレートも備えています。

湾曲したディスプレイは、斬新な「インフィニティエッジ」な外観ですが、通常、このデザインは取り外しが面倒です。 しかし、iMac Opening Wheelがあれば、ディスプレイを破損することなく外せます。IP規格の性能がない(ディスプレイを固定する接着剤が弱い)ことに感謝する必要がありますか?

Goodixの超薄型光学式ディスプレイ内指紋認証センサーはディスプレイの下に隠れており、軽く引っ張る必要があります。

最後に、Mi 11のベイパーチャンバー冷却システムを剥がします。これは、これらの多層のグラファイトとAIを組み合わせて、このマシンを冷却します。 銅とグラファイトはどちらも熱の負荷を軽減するのに非常に効率的であるため、AIが実際にここでどの程度貢献しているかはわかりませんが、何かの役には立っているのでしょう!

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります