手順 4を翻訳中
-
If you have any difficulty working out where the disk is, or if you're just curious to see inside, you can unscrew the lid.
-
You will generally need a Torx screwdriver. There are normally 6 screws around the perimeter of the drive. Remove these.
-
Most laptop drives have one more screw under the label. You will need to locate it by feel, or by viewing it with the light at just the right angle.
-
Scrape away the label from around the screw head, using a craft knife or similar. Under the label there is likely to be a layer of foil. Scrape this away as well, revealing the screw head. Remove the screw.
-
Desktop drives may have more screws, which you will have to locate and remove in the same way.
-
Once you have removed all the screws you should be able to prise off the lid. A rubber seal may make it a little reluctant to come off.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。