注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての14個のガイドに反映されます。
手順 1を翻訳中
手順1
Precautionary Notes
-
Take note of the two seams on the edge of your phone:
-
Screen seam: This seam separates the screen from the rest of the phone. This is where you have to pry.
-
Frame seam: This is where the plastic frame meets the back cover. It is held in place by screws. Do not pry at this seam.
-
Before you begin, note the following areas on the screen:
-
Screen flex cable: Do not insert the opening pick deeper than instructed or you risk damaging this cable.
-
Adhesive perimeter: Prying beyond this narrow perimeter without angling the pick will damage the OLED panel.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。