メインコンテンツにスキップ

PlayStation 2の電源ボードの交換

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
日本語

手順 5を翻訳中

手順5
PlayStation 2 Power Board Replacement: 手順 0、 1の画像 1
  • If there is a device occupying the expansion bay, make sure to remove the device. The expansion base should be empty.

  • Pry and remove the expansion bay cover away from its posts on the bottom case.

拡張ベイを占有しているデバイスがある場合は、デバイスを必ず外してください。拡張ベイは空にしなければなりません。

底部ケース上のポストから拡張ベイのカバーをこじ開けて取り出します。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります