メインコンテンツにスキップ

打开手表操作

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。

英語
中国語

手順 2を翻訳中

手順2
Opening Procedure, Safety Requirements: 手順 0、 3の画像 1 Opening Procedure, Safety Requirements: 手順 0、 3の画像 2 Opening Procedure, Safety Requirements: 手順 0、 3の画像 3
Safety Requirements
  • Because the gap between the screen and watch body is so thin, a sharp blade is needed to separate the two. Read the following warnings carefully before proceeding.

  • Protect your fingers by keeping them completely clear of the knife. If in doubt, protect your free hand with a heavy glove, such as a leather shop glove or gardening glove.

  • Be careful not to apply too much pressure, as this might cause the knife to slip and cut you, or damage the watch.

  • Wear eye protection. The knife or glass may break, sending pieces flying.

  • Feel free to attach or remove the watch band as needed to provide more control as you make repairs.

由于屏幕和表体之间的间隙非常薄,因此需要使用锋利的刀片将两者分开。在继续之前,请仔细阅读以下警告。

保持手指完全远离小刀,以保护手指。如有疑问,请用沉重的手套(如皮革店手套或园艺手套)保护你的手。

注意不要施加太大的压力,因为这可能会导致刀打滑并割伤你或损坏手表。

戴护目镜。刀或玻璃可能会破裂,使碎片飞散。

如有需要,可以随意连接或卸下表带,以在维修时提供更多控制。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります