メインコンテンツにスキップ

iPod Touch 7e generatie Vervanging van de schermmodule

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。

英語
オランダ語

手順 3を翻訳中

手順3
iPod Touch 7th Generation Display Assembly Replacement: 手順 0、 3の画像 1 iPod Touch 7th Generation Display Assembly Replacement: 手順 0、 3の画像 2 iPod Touch 7th Generation Display Assembly Replacement: 手順 0、 3の画像 3
  • Flip the Lightning connector/logic board assembly back over to expose the top of the logic board.

  • The display cable is lightly adhered to the top of the logic board.

  • Use the flat end of a spudger to peel the display cable up from the logic board.

Draai de Lightning-connector/logic board module terug om om de bovenkant van het logic board bloot te leggen.

De schermkabel zit lichtjes aan de bovenkant van het logic board vastgemaakt.

Gebruik het platte einde van een spudger om de schermkabel van het logic board af te peuteren.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります