/
私のワークベンチ

お持ちのデバイス用の修理ガイドとパーツ一覧とアンサーフォーラムにアクセスする。

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
参加する
ログイン

Procédure d'ouverture du Google Pixel 3 XL

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての12個のガイドに反映されます。

ガイドに戻る
英語
フランス語
前の手順 次の手順

手順 8を翻訳中

手順8
Google Pixel 3 XL Opening Procedure, Swing open the back cover: 手順 0、 3の画像 1 Google Pixel 3 XL Opening Procedure, Swing open the back cover: 手順 0、 3の画像 2 Google Pixel 3 XL Opening Procedure, Swing open the back cover: 手順 0、 3の画像 3
Swing open the back cover

  • Swing the right edge of the back cover upwards and rest the flipped panel along the left side of the phone.

  • Be sure to maintain slack on the fingerprint sensor cable and prevent it from being pinched.

  • During reassembly, this is a good point to power on your phone and test all functions before sealing it up. Be sure to power your phone back down completely before you continue working.

  • During reassembly, follow this guide to install custom-cut adhesives for your back cover.

  • If you replaced the fingerprint sensor, you'll need to use this software tool to make the phone recognize the new sensor.

Ouvrir la coque arrière

Soulevez le bord droit de la coque arrière, retournez-le et posez-le à gauche du téléphone.

Veillez à laisser du mou à la nappe du lecteur d'empreintes digitales et à ne pas la coincer.

Quand vous effectuez le remontage, c'est le moment d'allumer votre téléphone et de tester s'il fonctionne avant de le refermer. Veillez à le rééteindre complètement avant de continuer votre travail.

Lors du remontage, consultez ce tutoriel pour poser les bandes adhésives coupées sur mesure de votre coque arrière.

-[title] Swing open the back panel
-[* black] Swing the right edge of the back panel upwards and rest the flipped panel along the left side of the phone.
+[title] Swing open the back cover
+[* black] Swing the right edge of the back cover upwards and rest the flipped panel along the left side of the phone.
[* icon_note] Be sure to maintain slack on the fingerprint sensor cable and prevent it from being pinched.
[* icon_reminder] During reassembly, this is a good point to power on your phone and test all functions before sealing it up. Be sure to power your phone back down completely before you continue working.
-[* icon_reminder] During reassembly, [guide|126585|follow this guide|new_window=true] to install custom-cut adhesives for your back panel.
+[* icon_reminder] During reassembly, [guide|126585|follow this guide|new_window=true] to install custom-cut adhesives for your back cover.
+[* icon_reminder] If you replaced the fingerprint sensor, you'll need to use [link|https://pixelrepair.withgoogle.com/udfps|this software tool|new_window=true] to make the phone recognize the new sensor.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。