メインコンテンツにスキップ

Sostituzione cover posteriore Teenage Engineering OP-Z

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての8個のガイドに反映されます。

英語
イタリア語

手順 1を翻訳中

手順1
Teenage Engineering OP-Z Back Cover Replacement: 手順 0、 3の画像 1 Teenage Engineering OP-Z Back Cover Replacement: 手順 0、 3の画像 2 Teenage Engineering OP-Z Back Cover Replacement: 手順 0、 3の画像 3
  • Unlock the four rubber feet by turning them 90° counterclockwise using your thumb or finger tip.

  • There is a tiny mark on every foot facing the bottom edge of the OP-Z. After turning them they should face towards the short edge where the on/off switch is.

Sblocca i quattro piedini di gomma ruotandoli di 90° in senso antiorario usando il pollice o la punta di un dito.

C'è un piccolo segno su ogni piedino in corrispondenza del bordo inferiore dell'OP-Z. Dopo averli ruotati, dovrebbero essere tutti orientati verso il bordo più corto dove c'è l'interruttore on/off.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります