メインコンテンツにスキップ

Reemplazo de la batería de la PSP Go

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。

手順 3を翻訳中

英語
スペイン語
手順3
PSP Go Battery Replacement: 手順 0、 2の画像 1 PSP Go Battery Replacement: 手順 0、 2の画像 2
  • Use a plastic opening tool to pop out the battery, being careful not to snag the "Warranty Void" sticker in the process.

  • When putting a new battery into the PSP Go, make sure you hold the "Warranty Sticker" so you don't put the battery on top of it.

Usa una herramienta de apertura de plástico para sacar la batería, teniendo cuidado de no enganchar la etiqueta adhesiva "Warranty Void" en el proceso.

Al colocar una batería nueva en la PSP Go, asegúrate de sujetar la "Etiqueta de garantía" para no colocar la batería encima.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります