手順 10を翻訳中
手順10
Removing the Old Capacitors
-
The old capacitors are these rectangle shaped components shown here.
-
The factory capacitors are glued down. Using a small pair of needle nose pliers, gently pull up on the capacitor to break it free.
-
The capacitors are surface-mount, so simply melt the solder on each leg and pull it free.
-
Only replace ONE capacitor at a time. This minimizes the chances of you forgetting which ones went where.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。