手順 4を翻訳中
手順4
-
Using a #1 Phillips screwdriver, remove the two screws holding the pistol grip to the gearbox. Note that there are four holes in the pistol grip and gearbox, but only two of them will have screws. The screws will be arranged diagonally from one another, and can be re-installed in either diagonal configuration.
-
Pull the pistol grip off, and be careful when guiding the wires out.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。