はじめに

Use this guide to remove your access door.

パーツ

パーツは必要ありません。

  1. Unplug your iMac's AC cord along with any peripheral devices.
    • Unplug your iMac's AC cord along with any peripheral devices.

    • Lay your iMac face-down on a soft, clean surface as shown.

    • Be sure there isn't any dirt or debris on your work surface, as it may scratch the glass panel on the front of your iMac. We recommend placing a towel between the iMac and the work surface.

    • Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.

    • All three screws will remain captive in the access door.

    • Remove the access door.

    Before beginning unplug your iMac.

    Henry Barnett - 返信

    The screws are not phillips #1 as implied above. My phillips#2 bit fit.

    John McWilliams - 返信

    Yes phillips #2 is the correct Bit

    Heath - 返信

まとめ

To reassemble your device, follow these instructions in reverse order.

5 の人々がこのガイドを完成させました。

Andrew Bookholt

500,825 ポイント

619のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 3

過去 7 日: 6

過去 30 日: 24

今までの合計 4,104