手順 6を翻訳中
手順6
-
When inserting the headlight assembly back into the housing, make sure that the housing locator guides fit into the catches on both sides of the assembly.
-
Push the assembly into the housing until you hear it click into place.
-
Again use the 5mm nut driver to turn the locking nut that locks the assembly in its housing.
-
Turn on the ignition and check that the new bulb works. Close the hood.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。